Silicone Rubber To TPU  - Silicone Rubber To TPU
Silicone Rubber To TPU  - Silicone Rubber To TPU
Silicone Rubber To TPU

Product Specification:
Model No. : KN-300A
Minimum Order Quantity :   5 pieces
Lead Time:7-10 Days
Payment Terms:   T/T , Paypal , Western Union
Package:   100g/piece
Tel: +0086-138 -2374 -7978
Fax: 0086-755-81478372
E-mail: export@klbsilicone.com

RTV Silicone Rubber Glue  KN-300A 

Silicone Rubber To TPU 



Applications


KN-300A is silicone adhesive which is used for cured silicone rubber bonding  metal or plastic at room temperature.


Product Specifications


Appearance :Colorless and semi-transparent paste

Viscosity: 150000CPS
Elongation at break : 200%
Hardness : 30A




Product Advantage



Bonding Strength

The Silicone rubber is damaged

when break off the bonding units

Glue amount drops to 75% , Bonding effect 30% higher

 图片11_副本                                                                                 





                                                   No Whity ,No getting hardened 

                                                                                          after the KN-300X cured 

                                                                                         KN-300 Series




Waterproof

Withstand water boiling tests 

100




                                                                Good Sealing function 

                                                                                                                Once KN-300X is cured , it's silicone elasticity 

                                                                                                                which is electrical insulation,vibration absorbant.

                                                                                                                seal_副本                                     

                                                                                       


Processing


1, Cleaning material surface for bonding. Metal surface is cleaned by toluene. Plastic is cleaned by absolute ethyl alcohol.                 

2, Coating adhesive thickness≤1 mm  

3, At least 30 minutes pressing, the adhesive is cured completely after 24 hours at room temperature.



Attention



1, Need to clean surface for bonding,avoid the greasy dirt.
2, Make sure uniform pressure to keep bonded parts together.
3, KN-300A is easy to cure once contacting with moisture, it must be stored in a completely sealed packaging and away from the away from light and heat.
4, Avoid eye contact with the adhesive,If contact ,rinse with water immediately, then go to see the doctor.
5, Please fasten down the the caps after use to avoid the gel to be cured.




OUR ADVANTAGEService


Sorry,Here is the product description, there is no data!
Sorry,Here is the product notes, there is no data!