KL-301A/B two component adhesive swiftly cured to be silicone rubber at high temperature condition. Elastic and tight bond between cured type of silicone rubbers . The adhesive is characterized with good flowing ability before curing and elasticity electrical insulation property
Method of application:
Crosslink temperature: 170℃
Certificates: FDA | RoHs | CE | MSDS | REACH
Classification:Hot Melt Adhesives
Temperature resis : -60~280℃
Feature : Water resistance and high temperature resistance
1, Treat the substrates with blast sanding, polishing or wash with industrial alcohol.
2, Brushing, painting, dipping or spraying the CL-24S-2PA on the substrates.
3, Leave dry in room temp for 30 minutes or baking at 110-130℃ for 5-15minutes.
4, The primer treated substrates are processed within that day.
5, The first cure is suitable to DBPH system silicone rubber and the second cure the temperature maximum at 200℃.
1, Please cap its cover immediately after use to avoid volatilization.
2, Store the used and unused adhesive in separate way to lengthen the shelf life.
3, After the primer coated on the substrates, leave it volatilize completely before entering the mold, otherwise ,
there will be bubbles in the finished products.
4, Wash clean the substrates to remove dirts or oil to avoid bad adhesion.
5, Flush with water quickly once contacting with eyes accidently during use.