RTV adhesive KN-300X one component, ready-to-use adhesive sealants are extremely versatile. It cures to be silicone rubber at room temperature by exposure to ambient moisture to form a tough, elastic bond between cured type of silicone rubbers as preferably
RTV adhesive KN-300X are standard strength paste consistency which can be applied to bond silicone to Silicone, Silicone to nylon, glass, clothes, plastic and so on. It’s characterized by temperature resistance (-60~200℃), ozone resistance, UV-Resistance and electrical insulating property.
FDA Complaince (Food And Medical Grade)
Once KN-300X is cured ,
it's also elastic silicone rubber.
Notes: The photo shows the cured glue of KN-300 series
No Whity, No getting hardened after the KN-300X cured
99% of OK Rate.
Tear to break silicone rubber
Glue amount drops to 75%, Bonding effect 30% higher
Appearance: Colorless and semi-transparent gel
Usage One: Silicone rubber to silicone rubber at room temperature.
1, Cleaning: Cleaning the bonding surface.
2, Gluing: The distribution of the silicone glue on bonding surface had to be even and less than 5mm
3, Pressing: More than 120 munites of pressing. The glue reaches complete cure after 24 hours at 25℃.
Usage TWO: Silicone rubber to plastic at room temperature
1, Cleaning: Cleaning the bonding surface with toluene or absolute ethyl alcohol.
2, Activating: Brushing fewer adhesive(CL-24J) on the cleaned surface. (single brushing is enough)
3, Curing: Curing at room temperature for 30minutes
4, Gluing: After adhesive cured, brushing KN-300 on the bonding surface, pressing over 120minutes. Absolutely cured after 24 hours at 25℃