Silicone Rubber To Glass  - Silicone Rubber To Glass
Silicone Rubber To Glass

Product Specification:
Model No. : KN-300X
Minimum Order Quantity :   5 Pieces
Lead Time:7-10 Days
Payment Terms:   T/T , Paypal , Western Union
Package:   100g/piece ,330g/piece
Tel: +0086-138 -2374 -7978
Fax: 0086-755-81478372
E-mail: export@klbsilicone.com

RTV Silicone Rubber Glue  KN-300X 
Sticking Silicone Rubber To Glass 


Product Details



RTV adhesive KN-300X one component, ready-to-use adhesive sealants are extremely versatile. It cures to be silicone rubber at room temperature by exposure to ambient moisture to form a tough ,elastic bond between cured type of silicone rubbers as preferably


RTV adhesive KN-300X are standard strength paste consistency which can be applied to stick silicone glue to nylon, glass, clothes, plastic and so on. It’s characterized by temperature resistance (-60~200℃), ozone resistance, UV-Resistance and electrical insulating property. 



SI Glass1


Product Specifications


Appearance: Colorless and semi transparent paste
Viscosity:50000cps
Elongation:400%

Hardness:35A




Product Advantage



Waterproof

Withstand water boiling tests 

100


                                                          Good Sealing function 

                                                                                                      Once KN-300X is cured , it's silicone elasticity 

                                                                                                      which is electrical insulation,vibration absorbant.

                                                                                                     seal_副本

                                                                                                     Notes: The photo shows the cured glue of KN-300 series


No Whity ,No getting hardened 

after the KN-300X cured 



                                                                                     


140


                                                                  Bonding Strength

                                                                                                                    The Silicone rubber is damaged

                                                                                                                    when break off the bonding units

                                                                                                                    Glue amount drops to 75% , Bonding effect 30% higher

                                                                                                                    图片11_副本




Processing


1,Cleaning material surface for bonding.                                              

2,Coating adhesive thickness≤1mm  

3,At least 30 minutes pressing, the adhesive is cured completely after 24 hours at room temperature.




Attention


1,Need to clean surface for bonding,avoid the greasy dirt.
2,Make sure uniform pressure to keep bonded parts together
3,KN-300X is easy to cure once contacting with moisture, it must be stored in a completely sealed packaging and away from the  away from light and hot.
4,Avoid eye contact adhesive,If contact ,rinse with water immediately ,then go to see  the doctor.

5,Please fasten down the the caps after using to avoid the gel to be cured.




OUR ADVANTAGEService

Sorry,Here is the product description, there is no data!
Sorry,Here is the product notes, there is no data!