Silicone Primer CL-26AB-3 HTV Silicone Overmold Nickle Plated Metal CL-26AB-3, Silicone primer, is mainly to bond platinum curing agent-added HTV /LSR silicone with cured silicone rubber, PA(Nylon), Metallics, Polyester, PP
|Tel: +0086-180 9899 4276|
CL-26AB-3, Silicone primer, is mainly to bond platinum curing agent-added HTV /LSR silicone with cured silicone rubber, PA(Nylon), Metallics, Polyester, PP(Corona-treated), TPU etc.
CL-26A-3 : Gel with platinum catalyst
CL-26B-3 : Gel Viscosity :<20mpa.s
Specifical gravity : 0.95 g/cm3
Good Adhesion Strength
The Silicone is broken when is torn from Nickle plated metal
Adhesion strength reached over 2Mpa
silicone product ok rate reached 99%
No partial bonding failure
Exclusive Patents , General Use
Labour cost- saving
Easy processing, Can be dipped , No corrosion To nickle plated metal
The Silicone primer Can be dried in room temperature , Can be baked to dry.
3 Times Standard Tests before goods release
No adhesion failure.
1, Treat the substrates with solvent like industrial to remove dirts and oils.
2, Mix completely the A and B with ratio 1:1 and apply the primer by dipping, brushing, spraying or silk screen printing method.
3, Leave dry in room temp for 30 minutes or baking at 110-130℃ for 15-20 minutes.
4, The primer treated substrates are processed within that day.
5, Foward the unvulcanized silicone rubber with primer-coated substrates in mouding process or hot air vulcanization.
1, Please cap its cover immediately after use to avoid volatilization.
2, Store the used and unused adhesive in separate way to lengthen the shelf life.
4, Wash clean the substrates to remove dirts or oil to avoid bad adhesion.