Silicone Rubber To PPSU

Product Specification:

Model No. : KN-300T
Minimum Order Quantity :   5 Pieces
Lead Time:7-10 Day
Payment Terms:   T/T ,Paypal ,Western Union
Package:   100g/Piece

Tel: +0086-180 9899 4276
Fax: +86.755.8147.8872
E-mail: sales@bondsil.com

Inquiry Now

Product Details
Download

RTV Silicone Rubber Adhesive

Silicone Rubber To PPSU

KN-300T is silicone adhesive which is used for cured silicone rubber bonding PPSU , PC, metal, nylon or ABS.

1,High and low temperature resistance（-60~200℃）

2,UV and ozone resistance

3,Excellent insulation

4,None whity, never grow hard

Bonding Strength

The silicone rubber is damaged

when broken away from substrates

Glue amount drops to 75% , Bonding effect 30% higher

No Whity ,No getting harden

after the KN-300X cured

Good Sealing function

Once KN-300X is cured , it's silicone elasticity

which is electrical insulation,vibration absorbant.

Waterproof

Withstand water boiling tests

1, Cleaning material surface for bonding. Metal surface is cleaned by toluene. Plastic is cleaned by absolute ethyl alcohol.

2, Coating adhesive thickness≤1mm

3, At least 30 minutes pressing, the adhesive is cured completely after 24 hours at room temperature.

1, Need to clean surface for bonding, avoid the greasy dirt.

2, Make sure uniform pressure to keep bonded parts together.

3, KN-300T is easy to cure once contacting with moisture, it must be stored in a completely sealed packaging and away from the away from light and hot.

4, Avoid eye contact adhesive. If contact, rinse with water immediately, then go to see the doctor.

5, Please fasten down the the caps after using to avoid the gel to be cured.