What glue does liquid silica gel stick hot melt glue to use
Liquid silicone hot melt adhesive how to stick, is a topic often asked by many silica gel industry, even many people mistakenly think that liquid silicone is hot melt adhesive, resulting in a lot of accidents in production or application.
According to industry insiders, many bosses recommend KANGLIBANG cl-26ab-1 adhesive as the glue for hot melt adhesive with liquid silica gel.
Below together to roughly understand some of this bonding process, and many bosses recommend this glue!
Liquid silicone hot melt adhesive:
Some people mistake liquid silicone for hot melt, but it's not.
Hot melt is a malleable adhesive, used to act as a fixation, the product itself is solid.
Liquid silica gel has a wide range of USES. It can be used as food mold, artificial limb, sex product, pad printing head, electronic seal, clothing coating trademark, nipple insoles, etc.
There are a lot of products bonded by the two, the production of the trademark is mainly through this process to bond.
Cl-26ab-1 is the latest silicone manufacturer KANGLIBANG gum.
Mould thermal transfer printing silicone rubber, this thermal transfer printing adhesive is a two-component paint, glue is very simple;
In the service life, the rubber classic application of heat transfer silicone logo.
Liquid silicone hot melt adhesive cl-26ab-1:
1. Surface treatment: solvent chemical treatment on the substrate to remove oil and dust.
2. Glue: mix the two components of AB and mix them evenly, then brush or soak, spray or screen print.
3. Drying: dry for 5 minutes at a medium temperature below 110℃.
4. Stay: glue should be glued as soon as possible, preferably on the same day.
If you avoid pollution and are exposed to high temperature and humid air, the parking time should not exceed 3 days.
Vulcanization: unvulcanized silica gel is bonded to the substrate by rolling or hot air vulcanization.
KANGLIBANG is to creat solution for your problem with bonding silicone, welcome customer inquiry to us.