Organic medical silicone gel

Two-component silicone gel kl-6634 is an environmentally friendly medical/healthy/odorless pressure-sensitive adhesive.

Medical silicone gel, [kanglibang] focus on the development and production of silicone gel for more than 10 years, pay attention to environmental protection and health, tasteless, low VOC, environmental protection, at the temperature of 90℃ hot vulcanization for 10 minutes, fully cured into medical silicone gel film.

Excellent flexibility, low viscosity, easy to process.

Medical silicone gel

【 KANGLIBANG】 kl-6634

FDA approachable skin for medical purposes

Excellent softness

The viscosity is 20,000 to 50,000

Easy processing

Silicone gel application

Medical gel pad, medical silicone gel patch, medical skin patch

Adhesive and self-adhesive materials for biomedical applications

Scar paste, milk paste, etc

How does silicone gel solidify

Coating must be maintained in a good environment, the operation workshop is recommended to adopt dust-free treatment, temperature control in 25 ~ 35℃, humidity control in 15 ~ 60%.

Excessive dust will lead to an increase in undesirable, too low temperature will lead to poor leveling, adhesion drop, humidity is too high easy to cause shrinkage cavity coating, humidity is too low easy to cause electrostatic security risks, appear white surface phenomenon.

The glue material after already deployed should be used up as far as possible in 1 hour, if discover adhesive viscosity is raised apparently or present when gel, should stop to use.

Medical silicone gel advantages

This medical silicone gel is a flexible skin adhesive, two-component platinum catalyzed transparent silicone elastomer

Curing temperature range: room temperature curing for 60-120 minutes, no by-products

Solvent-free two-component system

Transparent before and after curing

Platinum catalytic curing system

No cured byproducts

Low viscosity before curing, easy to process

Excellent softness, no stress

After curing very low oil permeability, anti - toxicity

The adhesive force can be adjusted by adjusting the proportion of AB material

It can be pasted more than 2000 times

Polyethylene release film can be used

Through physiological compatibility, toxic cells, skin irritation and other tests

KANGLIBANG is to creat solution for your problem with bonding silicone, welcome customer inquiry to us.