KL-F6060AB,Self adhesive LSR , is addition type LSR , It has strong bond to thermoplastics like polycarbonate and does not stick to the mold featuring wi...
Self adhesive LSR KL-F6070AB
LSR & PC/PET
KL-F6060AB,Self adhesive LSR , is addition type LSR , It has strong bond to thermoplastics like polycarbonate and does not stick to the mold featuring with fast curing speed .
※Wireless chargers ,silicone precision electronic products
※3C electronic products
|Appearance||A: Transparent gel B: Milky white gel|
|Viscosity(mPa.s) GB-T 11409.8-1989||A: 4300000 B: 5500000|
|Shore Hardness (A)||60±2|
|Elongation at break(%)||≥300|
|Curing condition||TC10: 120℃*42S|
|※Standard Description||Viscosity is tested under room temperaturer 25℃|
Maximise the productivity and reduce labour costs
Releasable from the metal mold
silicone overmolding products , insert molding or double injection molding , partly needing bond and sophisticated precision parts.The finished product ok rate is highest.
Spare from use of base primer , bond to different substrates；Short curing time；Easily pigmentable
1、Mix A and B with mxing ratio A：B=1：1 and inject into the mold the mixed silicone, the injection must be full and complete.
2, Curing condition of silicone is suggested at 120 ℃/200S(Thickness 2mmm)
3,Test and determine the mold condition based on the thickness and size of silicone .
4、Storage：Keep the product sealed and stored at 20℃-35℃ away from light and heat, shelf life for 6 months.