KL-F6040AB,Self adhesive LSR , is addition type LSR , It has strong bond to thermoplastics like polycarbonate and does not stick to the mold featuring wi...
Tel: +86.755.8147.8876 | ||
Fax: +86.755.8147.8872 | ||
E-mail: sales@bondsil.com |
KL-F6040AB, Silicone bond to PC/PET
KL-F6040AB,Self adhesive LSR , is addition type LSR , It has strong bond to thermoplastics like polycarbonate and does not stick to the mold featuring with fast curing speed .
Widely used for radio charging and other electronic products、mobile phone protection shell、3C waterproof series electronic products、baby products.
Spare from use of base primer , bond to different substrates
Releasable from the metal mold
Easily pigmentable
Maximise the productivity and reduce labour costs ,Short curing time,Suitable for silicone overmolding products , insert molding or double injection molding , partly needing bond and sophisticated precision parts,The finished product ok rate is highest.
Appearance |
A : Transparent gel B: Milky white gel |
Viscosity(mPa.s) GB-T 11409.8-1989 |
A : 5400000 B:4800000 |
Shore Hardness (A) |
40±2 |
Tensile Strength(Mpa) |
≥6 |
Tear strength(kN/m) |
≥25 |
Elongation at break(%) |
≥600 |
Curing condition |
TC10: 120℃*40S |
TC90:120℃*88S |
|
Specifical gravity(g/cm3) |
1.10±0.02 |
※Standard Description |
Viscosity is tested under room temperaturer 25℃ |
1, Mix A and B with mxing ratio A:B=1:1 and inject into the mold the mixed silicone, the injection must be full and complete.
2, Curing condition of silicone is suggested at 120 ℃/200S(Thickness 2mmm)
3,Test and determine the mold condition based on the thickness and size of silicone .
TDS: KL-F6404KL-F6040AB -