Silicone primer, is mainly to bond addition-type, peroxide-system unvulcanised silicone rubber with cured silicone rubber, PP(Corona Treated), TPU, PA etc...
CL-26AB-1, Silicone primer, is mainly to bond addition-type, peroxide-system unvulcanised silicone rubber with cured silicone rubber, PP(Corona Treated), TPU, PA etc.
Specifical gravity: 0.95g/cm3
1, Treat the substrates with blast sanding, polishing or wash with industrial alcohol.
2, Brushing, painting, dipping or spraying the CL-24S-3 on the substrates.
3, Leave dry in room temp for 30 minutes or baking at 110-130℃ for 5-15mintes.
4, The primer treated substrates are processed within that day.
5, Apply the platinum cure silicone within primed-coated sustrates in moulding process or hot air curing method.
1, Please cap its cover immediately after use to avoid volatilization.
2, Store the used and unused adhesive in separate way to lengthen the shelf life.
3, After the primer coated on the substrates, leave it volatilize completely before entering the mold, otherwise, there will be bubbles in the finished products.
4, Wash clean the substrates to remove dirts or oil to avoid bad adhesion.
5, Flush with water quickly once contacting with eyes accidently during use.