Home > FAQ

FAQ
Contact us

Email: export@klbsilicone.com

Tel:+86.0755.8147.886

Addr: H Building ,Xinwei The 3rd Industrial Park,Dalang Street,Longhua New District , Shenzhen City ,Guangdong Province ,China

What glue sticks to copper and silicone?

04 Sep 2019 - silicone bonded to copper

silicone bonded to copper

According to the 12-year development and production experience of adhesive silicone special glue, kanglibang provides customers with adhesive solutions of copper and silicone as follows:

1. silicone bonded to copper at room temperature, such as silicone plate to copper, silicone sheet to copper, and silicone strip to copper

A. Requirements for adhesion: silicone and copper are enough for adhesion:

The choice of glue is: silicone treatment agent k770-3 and instant glue 603 or 601

Usage: firstly, silicone treatment agent k770-3 is used to treat the interface of silicone to be bonded, and it is left cool for 5-10 minutes. Once again, a small amount of instant glue 603 or 601 is placed on the surface of silicone or copper to be bonded. Finally, the silicone and copper are pressed together for a few seconds.

B. Requirements for adhesion: water-proof, high-temperature resistance, acid-alkali resistance, etc.

Glue selection: silicone glue kn-300t or kn-300a

Usage: first, make sure that there is no grease or dust on the surface to be bonded with silicone and copper (if any, clean it with alcohol or toluene); Secondly, evenly brush silicon water kn-300t or kn-300a on the surface of silicone or copper; Finally, the two are fitted and fixed or pressed and left for 10~12 hours.

2, silicone is not formed and copper vulcanization in the mold,Choose glue: silicone adhesive cl-24s-2 or cl-24c

Usage: first, make sure that there is no grease or dust on the surface to be bonded with silicone and copper (if any, clean it with alcohol or toluene); Secondly, evenly spray, apply and brush silicone adhesive cl-24s-2 or cl-24c on the surface of copper, and bake for 20~30 minutes at 110°C in the oven. Finally, after baking copper and silicone in the mold together with vulcanization bonding molding can be.

KANGLIBANG is to creat solution for your problem with bonding silicone, welcome customer inquiry to us.

contact us

Mobile:

+86.138.2374.7978Coco Wu (Tech support)

+86.135.0281.9396Marvin Liu (Sales)


Fax:

0086-755-81478372

Address:

H Building ,Xinwei The 3rd Industrial Park,Dalang Street,Longhua New District , Shenzhen City ,Guangdong Province ,China

Message

Technical support:baiila