CL-14A-2 one component,it’s a surfactant for sticking silicone rubber with double side tapes and adhesives stickers.With such primer , you can take advantage of 3M tapes,You can promote adhesion and increase bond strength on such difficult surfaces as silicone rubber . After brushing this primer on the silicone surface which can be glued as preferable with double side tapes.It dries quickly for fast tape application.
CL-14A-2 ： Colorless transparent liquid
Ratio(water=1) : 0.8
Solid content(baking at 150℃ for 4hours）:10%-15%
Room TEM dry time(Winter) :10-30 minutes
Room TEM dry time(Summer) :5-10 minutes
Storage :Keep the product sealed and stored at <25℃ away from light and heat ,shelf life for 6 months
Peel strength :Destroy the double side tape when peeling the Silicone of less 50 shore hardness from specific double side tape.
1, Surface treatment: clean the silicone surface with toluene
2, Brushing ,painting or spraying the CL-14A-2 on the silicone surfaces . leave dry in room temp for 3-10 minutes.Please keep it clean 3, Attach the silicone surface to double side tape,press it with roller . The bonding strength will be 70% complete for 1hour and reach the maximum after 24hours.
1, Keep far away from the heat and fire
2, Store in cool and dry place