Teach you how to remove 502 glue

502 glue has the characteristics of fast reaction and strong viscosity. It is widely used in electrical appliances, instruments, machinery, electronics, optical instruments, medical, light industry and civil fields. Sometimes some 502 glue will stick to our bodies or other places, and it cannot be washed clean by directly washing with water.
1. Operation method:
1. Where there is 502 glue, drip Kanglibang high-efficiency glue remover. If it is a vertical surface, you can first drip it on a cotton swab or paper towel, and then apply it on it.
2. After 20 seconds, the glue begins to soften and fall off the first layer, and begins to become mushy and transparent. At this time, you can use a cotton swab or paper towel to wipe it off.
3. Because the glue at the beginning softens the first layer of glue, and the glue at the bottom is not softened, we need to drip liquid again, and then after 5 seconds, we can wipe it off. The number of times this process is repeated is directly related to the thickness of the glue, generally not more than 5 times.
4. Finally, it is recommended to drop the liquid on the paper towel and use the paper towel for the final wiping work, so that it can be quickly removed.
2. Other methods:
1. Use banana water to drop on the glue stains, and use an old toothbrush to stir and brush continuously. When the glue marks become soft and take off, rinse with clean water, and brush repeatedly until they are clean. Put an absorbent cloth on the back of the clothes with glue marks, then apply some white vinegar on the glue marks, and finally wipe them clean with cotton dipped in water.
2. Use insulating oil, pour some insulating oil from the transformer on the table, 502 glue will soften quickly and can be rubbed off quickly.
3. 502 glue is a resin glue, as long as you use an organic solvent that dissolves the resin, such as acetone. But inhaling acetone is toxic, pay attention to the method of use, you can put the glue part into the bottle. It is said that if you put it in the refrigerator and freeze it, the glue will fall off, you can try it first.
4. If 502 glue is stuck on a small area, just soak it in hot water. If 502 glue is stuck on a large area, apply acetone and wait for about 5 to 10 minutes to remove it.
5. Acetone, gasoline, sesame oil, etc. are recommended. Pour some insulating oil from the transformer on your hands, and the 502 glue will soften quickly and can be easily rubbed off.