Silicone Epoxy Glue CL-24S-2D

Silicone to Epoxy Resin Adhesive
Product Model: CL-24S-2D
Packaging: 1000ml/bottle

Bonding Process: High-temperature hot vulcanization

Adhesive Features: See text for details

Materials: CL-24S-2 is a specialized adhesive for hot-vulcanizing peroxide-cured silicone rubber onto metals (such as carbon steel, stainless steel, aluminum, copper, galvanized and nickel-plated components) and epoxy resins, among other hard substrates.

CL-24S-2D Silicone-to-Epoxy Adhesive is a specialized adhesive for hot-vulcanization molding of unformed silicone rubber and epoxy resin rods (for power insulators and electrical fittings) in molds.

Features of CL-24S-2D Silicone-to-Epoxy Adhesive:

1. Excellent bonding to a variety of silicone rubber compounds, including those requiring or not requiring a second-stage cure.

2. Single-component, single-coat application, simplifying processing.

3. Bonded components are resistant to water, salt spray, chemicals, grease, solvents, and other harsh environments.

Silicone-to-Epoxy Adhesive CL-24S-2D Performance Specifications:

1. Appearance: Transparent liquid

2. Density (25°C): 0.80 g/cm³

3. Storage: Store at room temperature, away from light

4. Hazard Classification: None

5. Breakdown Voltage (with 4mm silicone sheath): 30 kV/cm²

6. High/Low Temperature Resistance: -60°C to 180°C

7. Shear Strength: 11 kg/cm²

8. Drying: 2 hours at room temperature (or 10-15 minutes at 80°C)

9. Solvent: Anhydrous ethanol

10. Storage Life: 8 months in unopened container (25°C)

Processing for Silicone-to-Epoxy Adhesive CL-24S-2D: Surface Treatment: Degrease the substrate by mechanical sandblasting or sandpapering, or chemically treat with alcohol.

1. Glue Application: Apply by brush, dipping, or spraying.

2. Drying: Allow to dry at room temperature for at least 5 minutes; baking is not necessary.

3. Storage: Bonding should be completed as soon as possible after gluing, preferably on the same day. Storage may not exceed 5 days, provided it is protected from contamination and exposure to high temperatures and humidity.

4. Vulcanization: The primary vulcanization process depends on the vulcanization conditions of the rubber compound. The secondary vulcanization process should not exceed 250°C.

Silicone-to-Epoxy Adhesive CL-24S-2D Precautions:

1. Store in a dry, cool place away from heat and open flames.

2. The solvent is volatile, so please tightly close the container after use.

3. Ensure a fire-proof and well-ventilated work area to prevent prolonged inhalation and skin contact.

4. Slight cloudiness does not affect the effectiveness of the product.

Packaging of Silicone-to-Epoxy Adhesive CL-24S-2D: 1000ml/bottle.