Email: sales@bondsil.com
Tel:
Addr: H Building ,Xinwei The 3rd Industrial Park,Dalang Street,Longhua New District , Shenzhen City ,Guangdong Province ,China
How to stick glass and plastic firmly?
21 Aug 2025
1. Selecting the Right Glue
High-Temperature Hot-Vulcanized Silicone Glass Glue CL-24S-7:
Silicone Glass Glue
Glue Model: CL-24S-7
Packaging: 1000ml/bottle
Boiling Process: High-Temperature Hot-Vulcanization
Glue Characteristics: Excellent results, strong bond, and consistent adhesion even if silicone breaks
Applicable Materials: High-Temperature Hot-Vulcanized Silicone Glass Glue CL-24S-7 is suitable for hot-vulcanization molding of uncured silicone rubber or fluorosilicone rubber with hard substrates such as glass at temperatures up to 170°C.
2. Bonding Steps
Surface Preparation:
Clean the glass and plastic surfaces thoroughly to remove any oil or dirt.
Plastic surfaces may require rinsing with acetone, sanding with sandpaper, and then wiping with acetone again.
Glue Application:
Use a caulking gun to evenly apply the glass glue or other adhesive of your choice to the surface to be bonded. If using two-component glue, mix thoroughly before applying.
Bonding and Curing:
Firmly bond the glued glass and plastic together.
Allow the adhesive to cure at room temperature, following the curing time of the glue.
