Which silica gel is used to stick the stainless steel glue
Daniel from New Zealand is looking for a silicone adhesive stainless steel glue through aliwangwang of our company's international station. The customer is a well-known cutter manufacturer.
Used on the handle of the glue, silica gel has been molded silicone sleeve and stainless steel at room temperature bonding.
The handle structure according to the customer, I recommend customers to use liquidity to compare good room temperature bonding KN - 300 - x and stainless steel bottom coating agent CL - 24 s - 3. Because it is foreign customers, send the sample transportation time is long, silicone and stainless steel adhesive MARVIN Suggestions with our side to show the customer, the customer is in favor of, this can be omitted to send the sample freight, also can quickly find sample results.
The next day, I showed the bonding effect to the customer (the effect diagram is as follows).
During the use of silica gel bonding stainless steel glue is as follows:
1, cleaning: first use solvent (anhydrous ethanol, 120# gasoline, toluene) to clean the stainless steel surface of oil and other dirt.
2. Surface treatment: then apply cl-24s-3 on the surface of stainless steel with absorbent cotton (it can be applied once, but the effect of repeated application is poor).
3. Drying: dry at least 30 minutes at room temperature, and apply glue kn-300x after cooling.
4. Adhesive coating: the thickness of the adhesive layer is no less than 1mm, and then the pressure is no less than 30 minutes, and the maximum bonding strength can be reached after 24 hours.
The customer thought the bonding effect of the sample was ok. After a week, he placed an order.
The customer said that more glue would be needed for mass production.
KANGLIBANG is to creat solution for your problem with bonding silicone, welcome customer inquiry to us.