What adhesive does liquid silica gel and iron use
More and more solid silicone hardware products, began to use liquid silicone and metal molding instead.
What can be done to improve production efficiency and which glue can be used to make a good product?
Liquid silica gel and iron are formed together in the mold. Before this process, the mold should be plated with a layer of electroplating, such as ferrofluoron plating, chrome plating, etc.
These coatings and liquid silicone and iron adhesives and so on are not sticky, can improve the product yield and production efficiency.
The following is to introduce how the silicone adhesive is used, its process is how.
Iron or metal surface is very easy to have oil stains or dust, should be used first chemical solvent, alcohol is recommended to use, alcohol decontamination ability is stronger.
Mix cl-26ab-24 in the proportion of A:B= 1:1 and stir well.
Then apply the cl-26ab-24 evenly to the surface of the iron using spray, silk screen, brush or soak.
Apply the iron of cl-26ab-24 and bake at 100-130° for 15-20 minutes.
The unvulcanized silica gel is bonded to iron by high temperature die-casting or hot air vulcanization.
It is believed that there are many silicone leather manufacturers concerned about the environmental protection of conlebon silicone adhesive, this glue of conlebon has passed SGS ROSH,REACN and other certification.
High environmental protection level.
KANGLIBANG is to creat solution for your problem with bonding silicone, welcome customer inquiry to us.