Home > FAQ

FAQ
Contact us

Email: sales@bondsil.com

Tel:

Addr: H Building ,Xinwei The 3rd Industrial Park,Dalang Street,Longhua New District , Shenzhen City ,Guangdong Province ,China

Toilet gel glue which good

24 Oct 2019

KNAGLIBANG silicone glue manufacturers recommend the use of silicone glue toilet 2: silicone toilet mat glue, toilet installed silicone sealant.

1: silicone ABS toilet seat - recommended kanglibang silicone treatment agent k770-4 and 406 instant glue

Silicone primer + quick-drying adhesive

A. Firstly, clean the adhesive surface of silicone and ABS plastic;

B. Apply silica gel primer K770 evenly on the interface of silica gel to be bonded (function to activate the surface of silica gel) and let cool at room temperature for 3~5 minutes (the time should be extended in rainy weather; glue must be applied within 2 hours after cooling; otherwise, the primer can be coated again);

C. Apply a small amount of glue 460 on the surface of silicone or ABS plastic evenly and press the silicone and plastic together for a few seconds.

2: install silicone sealant - silicone waterproof sealant recommended kn-300 series [deacidification, deoxime, dealcoholization silicone glue], the glue mildew proof, waterproof, moisture-proof, weatherproof, excellent sealing performance.

Application level is very high, this product is typically used for medical silicone product adhesion.

Use this glue on a slightly higher budget.

Silicone sealant usage:

Before installation and bonding, first stick tape on both sides of the gap to expose the gap.

Use a glass gun to hit the silicone sealant kn-300, then apply silicone glue on the surface, wipe the glue.

Wipe flat and then tear off the previous adhesive tape, will not stick to other places.

Don't wait for the glue to solidify before pulling it off.

Normally, watch dry for 30 minutes.

Cure completely for 24 hours.

It is recommended that silicone glue after the best 2-3 days after the use, otherwise the invisible seal waterproof performance will be affected.

Friendly tip: silicone glue after the glue, not immediately to wipe it, wait for it completely dry, then to deal with it.

Be in the place of next water mouth of closestool, seat enters water mouth to have 3 centimeters to control, OK.

KANGLIBANG is to creat solution for your problem with bonding silicone, welcome customer inquiry to us.

contact us

Mobile:

+0086-135 0281 9396 Edsion YIN (Sales)

+0086-18098994276 Gary Lee (Sales)

+0086-138 2374 7978 Coco Wei (Sales)

Fax:

+86.755.8147.8872

Address:

H Building ,Xinwei The 3rd Industrial Park,Dalang Street,Longhua New District , Shenzhen City ,Guangdong Province ,China

Message

Technical support:lamp-magic