Home > FAQ

FAQ
Contact us

Email: sales@bondsil.com

Tel:

Addr: H Building ,Xinwei The 3rd Industrial Park,Dalang Street,Longhua New District , Shenzhen City ,Guangdong Province ,China

Some practical considerations when using RTV silicone

17 Mar 2020

Make safe your silicone sealant/stick matches your application. Read the packaging thoroughly before beginning any plan.

Knowing which glue gun to manner is upright as momentous as knowing which stick. You'll indigence one that fits your specifying cartridge. If you're unsure, observe communicative to brush us for succor.

 silicone sealant/stick

You signior't indigence a lot of RTV silicone to get the stab done, especially when constitute a gasket. Extra corporeal will seep onto unintended areas.

Make permanent to postpone the entire cure repetition before worn your project. RTV cures by reenact with dilute in the intelligence so ambient humidity will subdue wretch tempo. It will take longer to wretch in arid locations; on the other deed; it will cure readily in very damp locations.

Don't manner silicone on a galvanized superficial.
Properly framed your surfaces, preferably within 24 hours of busy the RTV silicone. You failure to depart any ruins and residues that will clash with adhesion, curing or curing. For materials such as glass, moldable and gate you can hit the surfaces with mineral spirits.

Refrain from second-hand flatter products to prep your surfaces. Soaps leave a leavings that intermeddle with the surfaces sticking together.

RTV dislocate curing as soon as gas touches it, but separate formulations will have different tooling clock. Tooling period is the amount of opportunity you have before it rouse to epidermatous over. During this time, the sealant/stick can be flattering and formed.

Store disused sealant/adhesive by degree information from the package, and then holding the cartridge in a calm, arid area. Often, this entails driving the sealant/adhesive bodily to the top of the cartridge, and then refund the top. Any publicity in the cartridge will cause the material to inure in the bottle.

KANGLIBANG is to creat solution for your problem with bonding silicone, welcome customer inquiry to us.

contact us

Mobile:

+0086-135 0281 9396 Edsion YIN (Sales)

+0086-18098994276 Gary Lee (Sales)

+0086-138 2374 7978 Coco Wei (Sales)

Fax:

+86.755.8147.8872

Address:

H Building ,Xinwei The 3rd Industrial Park,Dalang Street,Longhua New District , Shenzhen City ,Guangdong Province ,China

Message

Technical support:lamp-magic