Home > FAQ

FAQ
Contact us

Email: sales@bondsil.com

Tel:

Addr: H Building ,Xinwei The 3rd Industrial Park,Dalang Street,Longhua New District , Shenzhen City ,Guangdong Province ,China

Silicone glue for automobile sealing ring

03 Mar 2020

With the rapid development of the automobile industry, the production capacity of various fields, rubber industry, steel industry, adhesive industry and so on have also developed.

So how should automobile seal ring production choose glue?

Here's concord to assist you in out.

Not only can withstand extreme temperature, but also corrosion resistance.

The sealing ring mainly consists of silicone bonded to iron or silicone bonded to stainless steel and other metal materials:

Bonding of molded silicone and stainless steel at room temperature:

Operation method 1: silicone bonded to stainless steel

First clean the stainless steel surface with toluene or acetone or alcohol (to remove the stainless steel surface of anti-oxidation oil, oil, dust, etc., stainless steel surface bright, smooth can do sandblasting, hydrochloric acid, rough treatment);

Secondly, apply the glue kn-300a or kn-300t on the surface of silicone or stainless steel evenly.

Finally, bring them together, fixed or pressed and let them sit for 8 to 12 hours.

Operation method two: silicone bonded to iron

First clean the iron surface with toluene or acetone or alcohol (remove the anti-oxidation oil, oil, dust, etc., rust surface bright, smooth can do sandblasting, hydrochloric acid, rough treatment);

Secondly, the treating agent cl-16-3 was used on the silicone surface and placed at room temperature for 10~15 minutes.

Again on the silicone or rust or plastic surface spot on a small amount of glue 601;

Finally, keep them together for a few seconds.

Remarks: 1. After the kn-300a adhesive, the product can maintain the softness, elasticity, sealing, prevention of exterior line, acid and alkali resistance, temperature resistance from -60°C to 280°C of the silica gel.

2. Cl-16-3 +601 is a quick bonding type. After treating silicone with treating agent cl-16-3, it should be abandoned for more than 10 minutes.

quick bonding type

KANGLIBANG is to creat solution for your problem with bonding silicone, welcome customer inquiry to us.

contact us

Mobile:

+0086-135 0281 9396 Edsion YIN (Sales)

+0086-18098994276 Gary Lee (Sales)

+0086-138 2374 7978 Coco Wei (Sales)

Fax:

+86.755.8147.8872

Address:

H Building ,Xinwei The 3rd Industrial Park,Dalang Street,Longhua New District , Shenzhen City ,Guangdong Province ,China

Message

Technical support:lamp-magic