Home > FAQ

FAQ
Contact us

Email: sales@bondsil.com

Tel:

Addr: H Building ,Xinwei The 3rd Industrial Park,Dalang Street,Longhua New District , Shenzhen City ,Guangdong Province ,China

Notes on the use of special primer for high temperature tape

28 Feb 2020

Daily use of high temperature tape special bottom coating agent notice what, the following with concord small make up to see the elevated temperature tape bottom coating agent use notice.

silicone base coating agent

When we use the special silicone base coating agent for high temperature tape, the following seven items should be noted:

1. Adjust the mixing ratio according to the type of film (PI polyimide film or PET), coating thickness and climatic conditions (ambient temperature, humidity);

2. The bonded substrate surface shall be treated with corona, clean and dry, free from dust and oil;

Three, during the coating process to pay attention to check, control the adhesive viscosity;

Four, coating must maintain a good fit for the environment, coating workshop appropriate best control in 65 percent;

5. After deployment, the base coating agent should be utilized up within two hours as far as possible. If the viscosity of the base coating agent is significantly increased or white fog appears, the application should be stopped immediately;

Vi. Volatile solvents are reflected in the rubber mixture. Please pay attention to ventilation and wear appropriate labor protection tools.

Keep away from fire, high temperature and pay attention to static electricity;

KANGLIBANG is to creat solution for your problem with bonding silicone, welcome customer inquiry to us.

contact us

Mobile:

+0086-135 0281 9396 Edsion YIN (Sales)

+0086-18098994276 Gary Lee (Sales)

+0086-138 2374 7978 Coco Wei (Sales)

Fax:

+86.755.8147.8872

Address:

H Building ,Xinwei The 3rd Industrial Park,Dalang Street,Longhua New District , Shenzhen City ,Guangdong Province ,China

Message

Technical support:lamp-magic