Home > FAQ

Contact us

Email: sales@bondsil.com


Addr: H Building ,Xinwei The 3rd Industrial Park,Dalang Street,Longhua New District , Shenzhen City ,Guangdong Province ,China

Medical silicone glue and vulcanizing agent

03 Sep 2019

Medical silicone glue and vulcanizing agent

Currently, the medical industry has long been applied to silicone products, such as silicone infusion tubes in hospitals, various laboratory instruments, prosthetic components implanted in the human body and so on.And these silicone medical products, medical special silicone glue and platinum sulfide agent (also known as platinum water).

Of course medical products are very strict about glue or vulcanizing agents.Our products must also be medical-grade tested and food-grade certified.Take the production of infusion tube for example, our main raw materials are rubber and vulcanizing agent two components.This vulcanizing agent will choose non-toxic, tasteless, after food certification platinum vulcanizing agent c-100a /B to process production, platinum vulcanizing agent anti-yellow agent properties can be very good to maintain the color of the rubber, and is the only one can be food certification, SGS,FDA,ROSH related reports, is widely used in medical products enterprises.

Medical silicone glue

In the process of mixing rubber often accidentally die, it is for a reason:

1. Vulcanizing agent is two-component material c-100a /B, which is formed at low temperature. When mixing, we must add component B first, and then add component A (ratio is raw material: B:A=1kg:2g:25g).

2. The product cannot be added when the rubber smelting temperature is higher than 45 degrees, because the platinum vulcanizing agent is formed at low temperature, the vulcanizing agent can only be added after the rubber refining is cooled, otherwise the rubber refining will be dead.

3. The mixed rubber material will be used up within 48 hours, otherwise it will be dead if put for a long time.

4. Also need to pay attention to a point, in hot air vulcanization should pay attention to the selection of good rubber, because different specifications of curing temperature conditions are different, on the final selection of which vulcanizing agent.

5. Platinum vulcanizing agent can not be mixed with other vulcanizing agent vulcanizing material, because the composition is different from the two mixing will conflict, resulting in poor rubber refining failure.

KANGLIBANG is to creat solution for your problem with bonding silicone, welcome customer inquiry to us.

contact us


+0086-135 0281 9396 Edsion YIN (Sales)

+0086-18098994276 Gary Lee (Sales)

+0086-138 2374 7978 Coco Wei (Sales)




H Building ,Xinwei The 3rd Industrial Park,Dalang Street,Longhua New District , Shenzhen City ,Guangdong Province ,China


Technical support:lamp-magic