Baby spoons are coated with a thin layer of silicone what kind of glue?

Now tableware manufacturers are all heat-resistant, non-toxic and environmentally friendly, so what kind of glue is used to make baby spoons?There are many kinds of baby spoons. Some are made of nylon and plastic.What we see is made of nylon.Take nylon for example:

One: nylon and glass fiber high temperature coating, silica gel opaque

The glue provided is cl-24c, cl-24c-2, cl-24c-3, cl-26a /B, cl-26a/b-3.

Among them, cl-26a /B and cl-26a/b-3 are two-component components, which should be used according to proportion A:B= 1:1.

The operation method is as follows:

First of all, if the surface of nylon is clean (not clean, please use toluene, alcohol and other substances to remove oil stains and dust on the surface), evenly brush or spray or soak the bonded surface of nylon with any of our company's glue above, and bake for 15 to 30 minutes at 90°C~120°C (the longer the better);Finally with silica gel together with hot vulcanization molding.

Nylon and glass fiber high temperature coating, silica gel transparent

Conlipon's optional glues are: cl-24c, cl-24c-2,

The operation method is as follows:

Firstly, when the surface of nylon is clean (not clean, please use toluene, alcohol and other substances to remove oil stains and dust on the surface), evenly brush or spray or soak the bonded surface of nylon with cl-24c or cl-24c-2 glue of our company, and bake for 15 to 30 minutes at 90°C~120°C (the longer the better);Finally with silica gel together with hot vulcanization molding.

Three: low temperature coating of pure nylon and silica gel (generally pure nylon temperature resistance below 120°C)

Cl-26a /B, cl-26a/b-3, cl-26a/b-3, cl-26a/b-3, cl-26a/b-3, cl-26a/b-3, cl-26a/b-3, cl-26a/b-3, cl-26a/b-3.

The general low temperature vulcanization is catalyzed by platinum vulcanization agent silica gel or liquid silica gel with nylon bonding;

The operation method is as follows:

First of all, if the surface of nylon is clean (not clean, please use toluene, alcohol and other substances to remove oil stains and dust on the surface), use our company's glue cl-26a /B or cl-26a/b-3 to evenly brush or spray or soak the bonded surface of nylon, bake for 15 to 30 minutes at 90°C~120°C (the longer the better);Finally with silica gel together with hot vulcanization molding.

KANGLIBANG is to creat solution for your problem with bonding silicone, welcome customer inquiry to us.