After making up the silicone rubber sheet and metal in the room temperature bonding what method?
There are two ways to bind the silicone rubber sheet and metal at room temperature after molding:
1, quick-drying type: first clean the silicone and metal bonding surface with toluene or acetone to dry (generally put in less than 1 minute to remove oil);
Spray and brush with silicone rubber primer cl-16 again, and place on silicone rubber surface for 5 minutes (to activate silicone rubber surface);
Again apply a small amount of quick drying glue 601 or 603 to the silicone or metal bonding surface;
Finally, press them together for 5-10 seconds.
2. Slow-drying: clean the silicone and metal bonding surface with toluene or acetone and let it dry (generally put it in less than 1 minute to remove oil stains);
Apply kn-300a on the interface of silicone or metal again;
Next, fix or hold the two together (as long as they are not displayed) for 8 hours.
KANGLIBANG is to creat solution for your problem with bonding silicone, welcome customer inquiry to us.