HTV Silicone Overmold Stainless Steel - HTV Silicone To Stainless Steel
HTV Silicone Overmold Stainless Steel - HTV Silicone To Stainless Steel
HTV Silicone Overmold Stainless St...

Product Specification:
Model No. : CL-24S-2PA
Minimum Order Quantity :   1 Little
Lead Time:5-7 Days
Payment Terms:   T/T, Paypal, Western Union
Package:   1L/Bottle
Tel: +0086-138 -2374 -7978
Fax: 0086-755-81478372
E-mail: export@klbsilicone.com

Silicone Primer CL-24S-2PA

HTV Silicone To Stainless Steel 



Applications


CL-24S-2PA, Silicone primer is to bond peroxide-cure silicone rubber with substrates like metallics (Metal, Carbon steel, Stainless Steel)


Adhesive CL-24S-2PA  HTV CL-24S-2PAsilicone primer CL-24S-2PA


Product Specifications


Appearance : Shallow yellow liquid or transparent liquid

Adhesion Strength:≥2MPa

Specifical Gravity: 0.75g/cm³


Product Advantage


Good Adhesion Strength 

No bubbles 

Making your silicone products 99% ok 

perfect adhesion strength





Processing


1, Treat the substrates with blast sanding, polishing or wash with industrial alcohol.                                                             

2, Brushing, painting, dipping or spraying the CL-24S-2PA on the substrates.                                                                                

3, Leave dry in room temp for 30 minutes or baking at 110-130℃ for 5-15minutes.                                                                   

4, The primer treated substrates are processed within that day.                             

5, The first cure is suitable to DBPH system silicone rubber and the second cure the temperature maximum at 200℃.      


Attention


1, Please cap its cover immediately after use to avoid volatilization.                                                                         

2, Store the used and unused adhesive in separate way to lengthen the shelf life.                                                                     

3, After the primer coated on the substrates, leave it volatilize completely before entering the mold, otherwise , 

there will be bubbles in the finished products. 

4, Wash clean the substrates to remove dirts or oil to avoid bad adhesion.                                                                                

5, Flush with water quickly once contacting with eyes accidently during use. 



OUR ADVANTAGEService

Sorry,Here is the product description, there is no data!
Sorry,Here is the product notes, there is no data!