Home > FAQ

FAQ
Contact us

Email: sales@bondsil.com

Tel:+86.755.8147.8876

Addr: H Building ,Xinwei The 3rd Industrial Park,Dalang Street,Longhua New District , Shenzhen City ,Guangdong Province ,China

Silicone pressure sensitive adhesive

11 Sep 2019 - silicone pressure sensitive adhesive

Chloroprene, silicone pressure sensitive adhesive;SPA for short, relative to the inorganic silicon pressure sensitive adhesive.

There are many water-based products in the market. [KANGLIBANG] silicone pressure-sensitive adhesive manufacturer produces kl-6634, which is non-water-based and according to ISO/rohs and other environmental protection standards. It can be cured at high temperature and repeatedly bonded up to 2000 times.

Silicone PSA;

Is the organic silicone resin as raw material production, pressure sensitive adhesive.

It has the characteristics of high temperature resistance and can be repeatedly bonded. As an organosilicon adhesive, it can be applied to PET/PI pressure-sensitive adhesive tape, medical application and anti-overflow milk paste, etc.

 

 

High temperature curing silicone pressure sensitive adhesive

 

[dongguan] in April last year, I searched the underwear factory for "organic silicon pressure-sensitive adhesive factory" and found[KANGLIBANG], they need a new cordless underwear material, apply about 0.5mm pressure-sensitive adhesive on the non-woven substrate, hoping to achieve self-adhesive, which can be used repeatedly.

They sample than the biological glue, hot melt glue.

But the customer is still not very satisfied, finally locked in the organic silicon material.

Kl-6634ab high temperature curing silicone pressure sensitive adhesive,90℃ bake for 9 minutes.

After proofing for environmental protection, skin-friendly, non-toxic side effects and other indicators are better than other proofing.

As a result, the family has purchased the bra with silicone pressure sensitive adhesive more than once.

Kl-6634ab is a fast-curing silicone pressure-sensitive adhesive, which has good adhesion to silicone, TPU and other substrates after curing.

And can improve the surface stripping force of silica gel.

The rubber material has good flow support before curing.

After curing, it has excellent electrical insulation and high transparency, and has excellent surface peeling force.

 

When in contact with the skin, the silicone pressure sensitive repeated bonding reaches more than 2000, easy to clean, when the surface produces stains, with detergent daub and then rinse clean with water.

Typical application: scar patch.

Antifever paste, health care massage paste, mobile phone protection paste, invisible bra, silicone protection paste series products.

KANGLIBANG is to creat solution for your problem with bonding silicone, welcome customer inquiry to us.

contact us

Mobile:

+0086-138 2374 7978Coco Wei (Tech support)

+0086-135 0281 9396Marvin Liu (Sales)


Fax:

+86.755.8147.8872

Address:

H Building ,Xinwei The 3rd Industrial Park,Dalang Street,Longhua New District , Shenzhen City ,Guangdong Province ,China

Message

Technical support:baiila