Home > FAQ

FAQ
Contact us

Email: sales@bondsil.com

Tel:+86.755.8147.8876

Addr: H Building ,Xinwei The 3rd Industrial Park,Dalang Street,Longhua New District , Shenzhen City ,Guangdong Province ,China

Silicone adhesive ABS epoxy resin with what glue and solutions

13 Aug 2019 - ABS plastic bond silicone

Silicone adhesive ABS epoxy resin with what glue and solutions

ABS plastic and silicone are increasingly used in the same product. ABS is a hard plastic and silica gel is an inert elastomer on the surface. How to bond the two materials together has become a production bonding problem.High bonding strength, easy to operate, environmental non-toxic glue can save a lot of labor cost and production cost, factory based on the two glue adhesive silicone and ABS, for example, a quick dry type 603 can also be bonding metal, applicable to small area of the silicone glue ABS, it has the advantage of fast positioning, high bonding strength, weakness would have been improper operation of bleaching.A type of slow dry glue, suitable for large area ABS adhesive silicone.Its advantages are transparent glue, no smell, good elasticity.ABS plastic bonding is a difficult problem for manufacturers to solve. Kanglibang offers the following solutions to solve the problem of ABS plastic bonding, all of which can achieve the effect of ABS plastic bonding.

ABS plastic and ABS plastic self-adhesive problem

In the manufacture of plastic products such as ABS plastic crafts and toys, ABS plastic is an active plastic, so it is easy to use adhesive.

1. Use professional solvent-based ABS adhesive

The principle of glue is changed to make ABS dissolve and blend with each other

The adhesive bond is tight and has extremely high strength, but this method is only suitable for the self-adhesion between ABS and ABS.

2. Use modified acrylate AB glue for bonding

The characteristics of modified acrylate AB glue are fast curing and wide application range, which can achieve very good effect in bonding ABS materials. However, compared with ABS professional glue, its disadvantage is that the two-component AB glue is not as convenient to use as the single-component ABS special glue.

3. Instant adhesive can also stick to ABS, but it is recommended not to use it, because many ABS plastic materials contain impurities. Instant adhesive may cause cracks.

4. Cl-24s-2 epoxy glue sticks to ABS plastic, but compared with modified acrylate AB glue, the curing speed of epoxy glue is slow.

ABS plastic and other materials of mutual bonding

1. What glue is used to bond ABS to active metal?

The use of modified acrylate AB glue can be adhesive, and bonding strength is high, if feel modified propylene

Acid ester AB glue has odor. If no curing time is required, epoxy resin glue can be used for bonding. Epoxy resin glue has slower curing time than modified acrylate AB glue.

2. ABS and reactive plastic bonding, such as ABS to PC,ABS to PVC,ABS to nylon and other materials.It can be bonded with single-component ABS special plastic adhesive, and the curing time reaches the highest strength in 24 hours.

ABS and inactive plastics.For example, ABS sticks PP, ABS sticks PE, etc.

KANGLIBANG is to creat solution for your problem with bonding silicone, welcome customer inquiry to us.

contact us

Mobile:

+0086-135 0281 9396 Edsion YIN (Sales)

+0086-18098994276 Gary Lee (Sales)

+0086-13823747978 Coco Wei (Sales)

Fax:

+86.755.8147.8872

Address:

H Building ,Xinwei The 3rd Industrial Park,Dalang Street,Longhua New District , Shenzhen City ,Guangdong Province ,China

Message

Technical support:baiila