Home > FAQ

FAQ
Contact us

Email: sales@bondsil.com

Tel:+86.755.8147.8876

Addr: H Building ,Xinwei The 3rd Industrial Park,Dalang Street,Longhua New District , Shenzhen City ,Guangdong Province ,China

How to use kn-300 normal temperature silicone adhesive

23 Aug 2019 - Room temperature silicone adhesive

  Room temperature silicone adhesive

  Room temperature silicone adhesive KN-300 is cured by moisture in the air, which is slow in curing and has slight odor after curing (tasteless after fully curing). Moreover, it can pass FDA certification and has excellent environmental protection performance. When the substrate is glued for about 30 minutes, the initial fixation (movable product) is completely cured for 24 hours, and the bonding effect is good.

   How to use KN-300 normal temperature silica gel adhesive

1, first clean the sticky surface, do not have water and dust. Apply glue to the silicone surface to be adhered to (large area can be scraped evenly with a scraper).

2. Press the two silica gel surfaces to be bonded together.

3. Place the compressed silica gel products in a flat place, and try not to bend the compressed silica gel products, so as to avoid modification of the silicone products, and the conditions allow for the best fixing device Settings.

KANGLIBANG is to creat solution for your problem with bonding silicone, welcome customer inquiry to us.

contact us

Mobile:

+0086-138 2374 7978Coco Wei (Tech support)

+0086-135 0281 9396Marvin Liu (Sales)


Fax:

+86.755.8147.8872

Address:

H Building ,Xinwei The 3rd Industrial Park,Dalang Street,Longhua New District , Shenzhen City ,Guangdong Province ,China

Message

Technical support:baiila