Home > FAQ

FAQ
Contact us

Email: export@klbsilicone.com

Tel:+86.0755.8147.886

Addr: H Building ,Xinwei The 3rd Industrial Park,Dalang Street,Longhua New District , Shenzhen City ,Guangdong Province ,China

How does silica gel and ABS not stick

06 Sep 2019 - silica gel and ABS

How does silica gel and ABS not stick?What causes non-sticking?ABS surface spray oil, will greatly reduce the viscosity of silicone ABS glue.Silicone hardness is too high, quick dry glue will be brittle.So there will be a lot of silicone ABS products, bonding is not firm.Many defective products.These problems should be avoided when making such products.

 

Plastic ABS, not high temperature resistant material, temperature resistant below 100°.Silicone glue ABS. Generally, silica gel is first molded into finished products and then bonded to ABS.Silicone adhesive ABS, generally there are two kinds of adhesive method, according to the different glue and operation method, you can choose.

KANGLIBANG is to creat solution for your problem with bonding silicone, welcome customer inquiry to us.

contact us

Mobile:

+86.138.2374.7978Coco Wu (Tech support)

+86.135.0281.9396Marvin Liu (Sales)


Fax:

0086-755-81478372

Address:

H Building ,Xinwei The 3rd Industrial Park,Dalang Street,Longhua New District , Shenzhen City ,Guangdong Province ,China

Message

Technical support:baiila